True Shield™ TSC X-TREME 100 is a flurochemical solution that provides a durable, transparent protective barrier against oil and water on concrete and other porous masonry or mineral surfaces.

SKU/Item Number: TSCX-TREME100
 

True shield™ TSC X-TREME 100 is a flurochemical solution that provides a durable, transparent protective barrier against oil and water on concrete and other porous masonry or mineral surfaces. 
 

RECOMMENDED USES

• Oil and water repellent coatings for concrete, brick, grout, terra cotta, sandstone, unglazed decorative tiling, gypsum drywall and other porous mineral surfaces.
• Oil and water repellent coatings for driveways, vehicle bays, industrial flooring, aircraft hangars, unglazed kitchen tiling, stone countertops, and other surfaces commonly stained by oil.

FEATURES AND BENEFITS

• Bonds to stone and masonry for durable protection
• Assists to repel oil and water
• Provides transparent vapor-permeable coating with no effect on appearance
• Will allow stone/masonry to breath.  Non-Film Forming
• Easy cleanability

DIRECTIONS FOR USE

Ensure the concrete or area to be sprayed is clean and dry before application.  Rinse surface thoroughly and allow to dry for at least 24 hours or until it appears visually dry.  True shield™ TSC X-TREME 100 should be applied using a low pressure sprayer.  It is best to spray the area lightly or until it is wet to break the tension, then apply a heavier rate.  While using True shield™ TSC X-TREME 100 on vertical surfaces, it should be applied from the base up.  After application of True shield™ TSC X-TREME 100 has dried, it must be rinsed off with water and then let to dry.  True shield™ TSC X-TREME 100 will not repel water until after rinsing. Always test on an inconspicuous area before applying product to total surface area. Do not apply when rain is forecast.  Coverage rates depend on the porosity and texture of the surface to be treated.  After approximately 5 to 10 minutes,  areas of excess product should be brushed or moved to other areas or picked up by absorption using a cloth or towel.   
 

HANDLING PRECAUTIONS

Product safety information required for safe use is not included in this document.  Before handling, read product and material safety data sheets and container labels for safe use, physical and health hazard information.  The material safety data sheet is available by calling M&M CHEMICAL, LLC.